PCB Board Price Quote

As for quantity, please decide if you would like to receive them in panels or pieces. Our MOQ is 5 panels/pieces. It can go up to 20 panels/pieces. Any inquiry with more panels/pieces needed, please email or contact us directly. In addition, if there is no array, then 1 panel is considered as 1 piece.

FR4 (tg-140/FR4 (tg-180):

For 1 layer board, the maximum panel size is within 1000 cm2.

For 2 layer board, the maximum panel size is within 900 cm2.

For 4 layer board, the maximum panel size is within 800 cm2.

For 6 layer board, the maximum panel size is within 300 cm2.

Aluminum:

For 1 layer board, the maximum panel size is within 400 cm2.

Please take these numbers ( max. panel size) into your consideration for your final products in panel or pieces. That is to say, you can panelize your board as you wish. However, as for the quantity and size area, please choose them as how you would like them to be when delivered. In other words, if you would like to receive them in panels, then please fill in the panel size and choose quantity as in how many panels not pieces. On the other hand, if you would like to receive them in piece, then you should choose the quantity in pieces not panels even if you have them panelized for the production. Any board size exceeds the range listed above will not be able to calculate in our system. This quotation is based on x-out ( cross-out ) acceptance. If it is X-out not allowed scenario, please email us directly for the accurate quotation.

When you wish to order a multi-layer such as more than 8 layers, please email us directly for the accurate quotation. Also, we can do other material as well such as CEM-1 , CEM-3 , MCPCB…etc. Regarding to thickness, please choose the closest thickness to your board if yours cannot be found on the chart. For example, if the thickness is 1.55mm, please choose 1.6mm. If it is 1.30mm then please choose either 1.6mm or 1.0mm.

Please check our capability for the min. of trace width and space. Be aware that the min. of trace width and space is related to the copper thickness. The chart can be found in capability.

When you choose the thickness of copper, it has some limits applied to each scenario. For copper thickness that is 0.5 oz, then there will be an additional charge applies to if the min. of trace width or space is less than 6mil. And, it can only go as low as 4mil.

When copper thickness is 1.0oz, there will be an additional charge applies to if the min. of trace width is less than 11mil, or the min. of trace space is less than 9mil. And, the limit is at 8mil for Trace Width and 6mil for Trace Space.

When copper thickness is 2.0oz, there will be an additional charge applies to if the min. of trace width or space is less than 14mil. And, it only go as low as 12 mil for both.

Be aware that the board thickness relates to the drilled hole size. Please have yourself checked our capacity first before you choose the thickness.

Any surface finish that is not listed on the quotation page but on our capability, please email us directly for the quick accurate quotation.

BGA-Pitch testing is free when BGA-pitch is > 12mil, but it costs extra money when it is <12.

All lead-time can be shortened, however each day less meaning extra charge is needed.If the quantity is 20 panels (all materials), the lead time will need one day extra.

Be aware that for immersion gold, it is referring to 1u inch gold. If you need thicker gold, then please contact us directly or write it down on the additional request box before you pay.

Finpo will use its own account to ship the freight.( TNT, UPS, FedEx, DHL )

Rest of Europe:

• Albania

  Austria

  Belarus

  Bosnia and Herzegovina

  Bulgaria

  Croatia

  Denmark

  Estonia

  Finland

  Greece

• Hungary

  Iceland

  Ireland

  Lithuania

  Malta

  Moldova

  Netherland

  Norway

  Poland

  Portugal

• Riga

  Romania

  Serbia and Montenegro

  Slovakia

  Slovenia

  Spain

  Sweden

  Switzerland

  Turkey

  Ukraine